variable:maxprofit=0;
variable:win=0;
variable:win2=0;

IF holding>0 and enterbars>0 THEN BEGIN
win:=high-enterprice;
IF win>maxprofit THEN maxprofit:=win;
win2:=maxprofit-win;
END

盈利大于50，小于100時，回撤30％平多 win2>=0.3*maxprofit then sell();

盈利大于50，小于100，這個條件描述是用 maxprofit>50 and maxprofit<100，還是 win>50 AND win<100 呢？

我之前用的maxprofit，但空頭(enterprice-L)止盈結(jié)果不對，用win反而對了，但是多頭止盈又不正常了。

maxprofit_duo:=hhv(h-enterprice,enterbars+1);

maxprofit_kong:=llv(enterprice-l,enterbars+1);

if maxprofit_duo>100 and maxprofit_duo<50 and holding>0 and c-enterpcie<=0.3*maxprofit_duo then sell;

if maxprofit_kong>100 and maxprofit_kong<50 and holding<0 and enterpcie-c<=0.3*maxprofit_kong then sell;

maxprofit_duo:=hhv(h-enterprice,enterbars+1);

maxprofit_kong:=llv(enterprice-l,enterbars+1);

if maxprofit_duo>100 and maxprofit_duo<50 and holding>0 and c-enterpcie<=0.3*maxprofit_duo then sell;

if maxprofit_kong>100 and maxprofit_kong<50 and holding<0 and enterpcie-c<=0.3*maxprofit_kong then sell;

c-enterpcie<=0.3*maxprofit_duo then sell

回撤超過30％，應(yīng)該是 c-enterpcie <= (1-0.3)*maxprofit_duo 吧？

if maxprofit_kong>100 and maxprofit_kong<50 and holding<0 and enterpcie-c<=0.3*maxprofit_kong then sell;

多頭沒問題，空頭仍然不對，不出信號，空頭如果去掉“maxprofit_kong>100 and maxprofit_kong<50” 這個條件就正常了

這也太怪了吧，為啥呢