白糖有突破，無信號
作者：金字塔 來源：cxh99.com 發布時間：2015年07月02日
- 咨詢內容：
//開始執行時 初始化數據IF BARPOS=1 THEN BEGIN
//POSITION := 0 ;
END //IF
//如果當前是沒有持倉的狀態IF POSITION=0 AND BARPOS>T20 AND H>L THEN BEGIN
//建立多頭進場條件
LONG := H > T20HI AND TIME>091500 AND TIME<145500 ;
//多頭進場
IF LONG THEN BEGIN
MYENTRYPRICE := IF(OPEN>T20HI ,OPEN ,T20HI) ;
BUY( _DEBUG,POSNUM,LIMITR,MYENTRYPRICE+MINDIFF);
POSITION := 1 ;
TURTLEUNITS := 1 ;
N := AVGTR ;
BUYORDERTHISBAR := 1;
END //IF
//建立空頭進場條件
SHORT := L < T20LO AND TIME>091500 AND TIME<145500 ;
//空頭進場
IF SHORT AND POSITION=0 THEN BEGIN
MYENTRYPRICE := IF(OPEN<T20LO ,OPEN ,T20LO) ;
BUYSHORT( _DEBUG,POSNUM,LIMITR,MYENTRYPRICE-MINDIFF);
POSITION := -1 ;
TURTLEUNITS := 1 ;
N := AVGTR ;
BUYORDERTHISBAR := 1;
END
//不要跳轉，讓程序檢查同一根K線是否可以加倉
//GOTO CONTINUELINE ;
END //IF
[此貼子已經被作者于2014/5/6 15:26:47編輯過]
- 金字塔客服：
那么就是其他條件沒滿足
- 用戶回復：
如上圖
- 網友回復：
// 適用于10分鐘框架圖表// 這個版本可以用于在圖表上顯示信號,也可以做自動交易// 同一根K線多次發出指令// DESIGNED BY ZHANG// 2013.12.10
//聲明參數INPUT : T20(20,15,60,1) ;INPUT : ATRLEN(20,5,60,1) ;INPUT : POSNUM(3,1,20,1) ;INPUT : M(30,5,300,5) ;INPUT : X1(20,5,100,5) ;INPUT : Y1(60,5,100,5) ;INPUT : X2(5,1,10,1) ;INPUT : Y2(10,1,10,1) ;
//通道突破模塊--------------------1
//聲明變量NT := 1 ;
//調試信息帶時間戳BUYORDERTHISBAR := 0 ;
//當前BAR有過交易VARIABLE:回溯值1:=20; //定義全局變量VARIABLE:回溯值2:=10; //定義全局變量
VARIABLE : _DEBUG = 1 ;
//是否輸出前臺交易指令VARIABLE : _TDEBUG = 1 ;
//是否輸出后臺交易指令VARIABLE : _DEBUGOUT = 0 ;
//是否輸出后臺交易的調試信息
VARIABLE : MYENTRYPRICE =0 ;
//開倉價格VARIABLE : MYEXITPRICE =0 ;
//平倉價格
VARIABLE : TURTLEUNITS=0 ;
//交易單位VARIABLE : POSITION=0 ;
//倉位狀態//0表示沒有倉位，1表示持有多頭， -1表示持有空頭
VARIABLE : T20HI=CLOSE;
//20周期的高點VARIABLE : T20LO=CLOSE;
//20周期的低點
VARIABLE : T10HI=CLOSE ;
//10周期的高點VARIABLE : T10LO=CLOSE ;
//10周期的低點
//自適應模塊1市場波動率:=STD(CLOSE,M);昨日市場波動率:=STD(REF(CLOSE,1),M);波動率的變化率:=(市場波動率-昨日市場波動率)/市場波動率;回溯值1:=(1+波動率的變化率)*回溯值1;//LOOKBACKDAYS回溯值1:=ROUND(回溯值1);//取整回溯值1:=MIN(回溯值1,Y1);//確認回溯值不大于60回溯值1:=MAX(回溯值1,X1);//確認回溯值不小于20X周期最高價:REF(HHV(H,回溯值1),1);X周期最低價:REF(LLV(L,回溯值1),1);
T20HI := X周期最高價 ;T20LO := X周期最低價 ;
//自適應模塊2市場波動率:=STD(CLOSE,M);昨日市場波動率:=STD(REF(CLOSE,1),M);波動率的變化率:=(市場波動率-昨日市場波動率)/市場波動率;回溯值1:=(1+波動率的變化率)*回溯值1;//LOOKBACKDAYS回溯值1:=ROUND(回溯值1);//取整回溯值1:=MIN(回溯值1,Y2);//確認回溯值不大于60回溯值1:=MAX(回溯值1,X2);//確認回溯值不小于20y周期最高價:=REF(HHV(H,回溯值1),1);y周期最低價:=REF(LLV(L,回溯值1),1);
T10HI := y周期最高價 ;T10LO := y周期最低價 ;
AVGTR := REF(MA(TR,ATRLEN),1) ;
//開始執行時 初始化數據IF BARPOS=1 THEN BEGIN
//POSITION := 0 ;
END //IF
//如果當前是沒有持倉的狀態IF POSITION=0 AND BARPOS>T20 AND H>L THEN BEGIN
//建立多頭進場條件
LONG := H > T20HI AND TIME>091500 AND TIME<145500 ;
//多頭進場
IF LONG THEN BEGIN
MYENTRYPRICE := IF(OPEN>T20HI ,OPEN ,T20HI) ;
BUY( _DEBUG,POSNUM,LIMITR,MYENTRYPRICE+MINDIFF);
POSITION := 1 ;
TURTLEUNITS := 1 ;
N := AVGTR ;
BUYORDERTHISBAR := 1;
END //IF
//建立空頭進場條件
SHORT := L < T20LO AND TIME>091500 AND TIME<145500 ;
//空頭進場
IF SHORT AND POSITION=0 THEN BEGIN
MYENTRYPRICE := IF(OPEN<T20LO ,OPEN ,T20LO) ;
BUYSHORT( _DEBUG,POSNUM,LIMITR,MYENTRYPRICE-MINDIFF);
POSITION := -1 ;
TURTLEUNITS := 1 ;
N := AVGTR ;
BUYORDERTHISBAR := 1;
END
//不要跳轉，讓程序檢查同一根K線是否可以加倉
//GOTO CONTINUELINE ;
END //IF
- 網友回復：
//如果當前持有多頭倉位的狀態
IF POSITION=1 AND BARPOS>T20 AND H>L THEN BEGIN
//建立多頭離場條件
LONGX1 := LOW < T10LO ;
IF LONGX1 AND BUYORDERTHISBAR=0 THEN BEGIN
MYEXITPRICE := IF(OPEN<T10LO,OPEN ,T10LO) ;
SELL( _DEBUG ,POSNUM,LIMITR,MYEXITPRICE-MINDIFF);
POSITION := 0 ;
TURTLEUNITS := 0 ;
END
//建立多頭止損條件
LONGX2 := (LOW<MYENTRYPRICE-2*N) ;
IF LONGX2 AND POSITION=1 AND BUYORDERTHISBAR=0 THEN BEGIN
MYEXITPRICE := IF(OPEN<MYENTRYPRICE-2*N ,OPEN ,MYENTRYPRICE-2*N ) ;
MYEXITPRICE := FLOOR(MYEXITPRICE/MINDIFF)*MINDIFF ;
SELL( _DEBUG ,0,LIMITR,MYEXITPRICE-MINDIFF);
POSITION := 0 ;
TURTLEUNITS := 0 ;
END //日內平多倉 IF TIME>=145500 THEN BEGIN 收盤平多:SELL(1,POSNUM,MARKET); END
GOTO CONTINUELINE ;
END //IF
//如果當前持有空頭倉位的狀態
IF POSITION = -1 AND BARPOS>T20 AND H>L THEN BEGIN
//建立空頭離場條件
SHORTX1 :=( H > T10HI ) ;
IF SHORTX1 AND BUYORDERTHISBAR=0 THEN BEGIN
MYEXITPRICE := IF(OPEN>T10HI ,OPEN ,T10HI ) ;
SELLSHORT( _DEBUG,POSNUM,LIMITR,MYEXITPRICE+MINDIFF);
POSITION := 0 ;
TURTLEUNITS := 0 ;
END
//建立空頭止損條件
SHORTX2 := HIGH > MYENTRYPRICE + 2*N ;
IF SHORTX2 AND POSITION = -1 AND BUYORDERTHISBAR=0 THEN BEGIN
MYEXITPRICE := IF(OPEN>MYENTRYPRICE+2*N ,OPEN ,MYENTRYPRICE+2*N ) ;
MYEXITPRICE := CEILING(MYEXITPRICE/MINDIFF)*MINDIFF ;
SELLSHORT( _DEBUG,0,LIMITR,MYEXITPRICE+MINDIFF);
POSITION := 0 ;
TURTLEUNITS := 0 ;
END
//日內平空倉 IF TIME>=145500 THEN BEGIN 收盤平空:SELLSHORT(1,POSNUM,MARKET); END
END //IF
打印本文
關閉窗口