Super Cobmo超級組合當沖交易系統

今天想要報告的是Building Winning Trading Systems with TradeStation裡面的最后一個交易系統。名稱叫做Super Combo Day Trading Strategy，中文我翻譯成超級組合當沖交易系統。

 

 

這個系統的內容就像他的名字一樣，把相當多的觀念和技術組合起來，以致于讓這個系統太複雜，跟我認為交易系統應該要越簡單越好的觀念稍有出入。所以我就不仔細介紹這個當沖系統的觀念，只把他的程式碼分享出來。如果有人想試用這個系統的話，記得要在chart 裡面insert兩個symbol, 分別是這個商品的5min的線圖，和1日的線圖。因為這個系統會用到data2(也就是日線)的資料。我自己是簡單測試過臺指期的資料了，看來績效很爛，所以怕麻煩的人可以不用試了。

 

以下是EASYLANUAGE 語言

 

 

 

{Super Combo by George Pruitt

This intraday trading system will illustrate the multiple data handling

capabilities of TradeStation. All pertinent buy and sell calculations will be

based on daily bars and actual trades will be executed on 5-min bars. I have

made most of the parameters input variables.}

 

Inputs:waitPeriodMins(30),initTradesEndTime(1430),liqRevEndTime(1200),

thrustPrcnt1(0.30),thrustPrcnt2(0.60),breakOutPrcnt(0.25),

failedBreakOutPrcnt(0.25),protStopPrcnt1(0.25),protStopPrcnt2(0.15),

protStopAmt(3.00),breakEvenPrcnt(0.50),avgRngLength(10),avgOCLength(10);

Variables:averageRange(0),averageOCRange(0),canTrade(0),buyEasierDay(FALSE),

sellEasierDay(FALSE),buyBOPoint(0),sellBOPoint(0),longBreakPt(0),

shortBreakPt(0),longFBOPoint(0),shortFBOPoint(0),barCount(0),

intraHigh(0),intraLow(999999),buysToday(0),sellsToday(0),

currTrdType(0),longLiqPoint(0),shortLiqPoint(0),yesterdayOCRRange(0),

intraTradeHigh(0),intraTradeLow(999999);

{Just like we did in the pseudocode—let's start out with the daily bar

calculations. If Date <> Date[1]—first bar of day}

if(Date <> Date[1]) then {save time by doing these calculations once per day}

begin

averageRange = Average(Range,10) of Data2; {Data 2 points to daily bars}

yesterdayOCRRange = AbsValue(Open of Data2-Close of Data2);

averageOCRange = Average(AbsValue(Open of Data2-Close of Data2),10);

canTrade = 0;

if(yesterdayOCRRange< 0.85*averageOCRange) then canTrade = 1;

buyEasierDay = FALSE;

sellEasierDay = FALSE;

{See how we refer to Data2 - the daily data}

if(Close of Data2 <= Close[1] of Data2) then buyEasierDay = TRUE;

if(Close of Data2 > Close[1] of Data2) then sellEasierDay = TRUE;

if(buyEasierDay) then

begin

buyBOPoint = Open of data1 + thrustPrcnt1*averageRange;

sellBOPoint = Open of data1 - thrustPrcnt2*averageRange;

 

 

 

end;

if(sellEasierDay) then

begin

sellBOPoint = Open of data1 - thrustPrcnt1*averageRange;

buyBOPoint = Open of data1 + thrustPrcnt2*averageRange;

end;

longBreakPt = High of Data2 + breakOutPrcnt*averageRange;

shortBreakPt = Low of Data2 - breakOutPrcnt*averageRange;

shortFBOPoint = High of Data2 - failedBreakOutPrcnt*averageRange;

longFBOPoint = Low of Data2 + failedBreakOutPrcnt*averageRange;

{Go ahead and initialize any variables that we may need later on in the day}

barCount = 0;

intraHigh = 0;intraLow = 999999; {Didn't know you could do this}

buysToday = 0;sellsToday = 0;{You can put multiple statements on one

line}

currTrdType = 0;

end; {End of the first bar of data}

{Now let's trade and manage on 5-min bars}

if(High > intraHigh) then intraHigh = High;

if(Low < intraLow ) then intraLow = Low;

barCount = barCount + 1; {count the number of bars of intraday data}

if(barCount > waitPeriodMins/BarInterval and canTrade = 1) then

{have we waited long enough—wait PeriodMin is an input variable and

BarInterval is set by TradeStation. Wait PeriodMins = 30 and BarInterval = 5,

so 30/5 = 6}

begin

if(MarketPosition = 0) then

begin

intraTradeHigh = 0;

intraTradeLow = 999999;

end;

if(MarketPosition = 1) then

begin

intraTradeHigh = MaxList(intraTradeHigh,High);

buysToday = 1;

end;

if(MarketPosition =-1) then

begin

intraTradeLow = MinList(intraTradeLow,Low);

sellsToday = 1;

end;

if(buysToday = 0 and Time < initTradesEndTime) then

Buy("LBreakOut") next bar at buyBOPoint stop;

if(sellsToday = 0 and Time < initTradesEndTime) then

 

 

 

SellShort("SBreakout") next bar at sellBOPoint stop;

if(intraHigh > longBreakPt and sellsToday = 0 and Time <

initTradesEndTime) then

SellShort("SfailedBO") next bar at shortFBOPoint stop;

if(intraLow < shortBreakPt and buysToday = 0 and Time <

initTradesEndTime) then

Buy("BfailedBO") next bar at longFBOPoint stop;

{The next module keeps track of positions and places protective stops}

if(MarketPosition = 1) then

begin

longLiqPoint = EntryPrice - protStopPrcnt1*averageRange;

longLiqPoint = MinList(longLiqPoint,EntryPrice - protStopAmt);

if(MarketPosition(1) = -1 and BarsSinceEntry = 1 and

High[1] >= shortLiqPoint and shortLiqPoint < shortFBOPoint)

then

currTrdType = -2; {we just got long from a short liq reversal}

if(currTrdType = -2) then

begin

longLiqPoint = EntryPrice - protStopPrcnt2*averageRange;

longLiqPoint = MinList(longLiqPoint,EntryPrice -

protStopAmt);

end;{ www.weiqiv.net.cn }

if(intraTradeHigh >= EntryPrice + breakEvenPrcnt*averageRange)

then

longLiqPoint = EntryPrice; {BreakEven trade}

if(Time >= initTradesEndTime) then

longLiqPoint = MaxList(longLiqPoint,Lowest(Low,3)); {Trailing

stop}

if(Time < liqRevEndTime and sellsToday = 0 and

longLiqPoint <> EntryPrice and BarsSinceEntry >= 4) then

begin

SellShort("LongLiqRev") next bar at longLiqPoint stop;

end

else begin

Sell("LongLiq") next bar at longLiqPoint stop;

end;

end;

if(MarketPosition =-1) then

begin

shortLiqPoint = EntryPrice+protStopPrcnt1*averageRange;

shortLiqPoint = MaxList(shortLiqPoint,EntryPrice + protStopAmt);

if(MarketPosition(1) = 1 and BarsSinceEntry(0) = 1 and

Low [1] <= longLiqPoint and longLiqPoint > longFBOPoint) then

currTrdType = +2; {we just got long from a short liq reversal}

if(currTrdType = +2) then

begin

shortLiqPoint = EntryPrice + protStopPrcnt2*averageRange;

shortLiqPoint = MaxList(shortLiqPoint,EntryPrice + protStopAmt);

end;

 

 

 

if(intraTradeLow <= EntryPrice - breakEvenPrcnt*averageRange) then

shortLiqPoint = EntryPrice; {BreakEven trade}

if(Time >= initTradesEndTime) then

shortLiqPoint = MinList(shortLiqPoint,Highest(High,3));

{Trailing stop}

if(Time < liqRevEndTime and buysToday = 0 and

shortLiqPoint <> EntryPrice and BarsSinceEntry >= 4) then

begin

Buy("ShortLiqRev") next bar at shortLiqPoint stop;

end

else begin

BuyToCover("ShortLiq") next bar at shortLiqPoint stop;

end;

end;

end;

SetExitOnClose;