[求助]煩請高手將同花順公式改為通達信的 [通達信]
-
咨詢內容：
這是一個主圖畫線的公式，在通達信上不通過。煩勞高手給改改啊。
KU1:=IF(HIGH=HHV(HIGH,3),1,0);
KD1:=IF(LOW=LLV(LOW,3),1,0);
UL:=IF(REF(KU1,2)=1 AND REF(KU1,1)=0
AND KU1=0,REF(HIGH,2),REF(HIGH,2+BARSLAST(REF(KU1,2)=1
AND REF(KU1,1)=0 AND KU1=0)));
DL:=IF(REF(KD1,2)=1 AND REF(KD1,1)=0 AND KD1=0,REF(LOW,2),REF(LOW,2+BARSLAST(REF(KD1,2)=1
AND REF(KD1,1)=0 AND KD1=0)));
HV:=H>UL AND H>REF(H,1) ;
LV:=L
- 3;
HV1:=HV AND IP AND H>=HHV(H,BARSLAST(LV));
LV1:=LV AND IP AND L<=LLV(L,BARSLAST(HV));
DRAWLINE(LV1,LOW,HV1, HIGH,0),coloryellow,LINETHICK2;
DRAWLINE(HV1,HIGH,LV1, LOW,0),colormagenta,LINETHICK2;
///加入中樞判定
//簡化版
N1:=10;N2:=10;DISP:=2;K:=1;
P1:=PEAK(1,K*N1,1);
P2:=PEAK(1,K*N1,2);
WP1:=PEAKBARS(1,K*N1,1);
WP2:=PEAKBARS(1,K*N1,2);
T1:=TROUGH(2,K*N2,1);
T2:=TROUGH(2,K*N2,2);
WT1:=TROUGHBARS(2,K*N2,1);
WT2:=TROUGHBARS(2,K*N2,2);
TJ1:=P1>T1 AND P2>T2 ;
ZD:=MAX(T1,T2);
ZG:=MIN(P1,P2);
LL:=MIN(T1,T2);
HH:=MAX(P1,P2);
TJ2:=FILTER(ZG>ZD,2);
TJ3:=ZG=REF(ZG,BARSLAST(TJ2)) OR ZD=REF(ZD,BARSLAST(TJ2));
TJ4:=TJ1 AND TJ2 AND NOT(TJ3);
TJ5:=BETWEEN(ZD,REF(ZD,REF(BARSLAST(TJ4),1)),REF(ZG,REF(BARSLAST(TJ4),1)));
TJ6:=BETWEEN(ZG,REF(ZD,REF(BARSLAST(TJ4),1)),REF(ZG,REF(BARSLAST(TJ4),1)));
TJ7:=ZG>REF(ZG,REF(BARSLAST(TJ4),1)) AND ZD
-
通達信技術部：
KU1:=IF(HIGH=HHV(HIGH,3),1,0);
KD1:=IF(LOW=LLV(LOW,3),1,0);
UL:=IF(REF(KU1,2)=1 AND REF(KU1,1)=0
AND KU1=0,REF(HIGH,2),REF(HIGH,2+BARSLAST(REF(KU1,2)=1
AND REF(KU1,1)=0 AND KU1=0)));
DL:=IF(REF(KD1,2)=1 AND REF(KD1,1)=0 AND KD1=0,REF(LOW,2),REF(LOW,2+BARSLAST(REF(KD1,2)=1
AND REF(KD1,1)=0 AND KD1=0)));
HV:=H>UL AND H>REF(H,1) ;
LV:=L
- 3;
HV1:=HV AND IP AND H>=HHV(H,BARSLAST(LV));
LV1:=LV AND IP AND L<=LLV(L,BARSLAST(HV));
DRAWLINE(LV1,LOW,HV1, HIGH,0),coloryellow,LINETHICK2;
DRAWLINE(HV1,HIGH,LV1, LOW,0),colormagenta,LINETHICK2;
///加入中樞判定
//簡化版
N1:=10;N2:=10;DISP:=2;K:=1;
P1:=PEAK(1,K*N1,1);
P2:=PEAK(1,K*N1,2);
WP1:=PEAKBARS(1,K*N1,1);
WP2:=PEAKBARS(1,K*N1,2);
T1:=TROUGH(2,K*N2,1);
T2:=TROUGH(2,K*N2,2);
WT1:=TROUGHBARS(2,K*N2,1);
WT2:=TROUGHBARS(2,K*N2,2);
TJ1:=P1>T1 AND P2>T2 ;
ZD:=MAX(T1,T2);
ZG:=MIN(P1,P2);
LL:=MIN(T1,T2);
HH:=MAX(P1,P2);
TJ2:=FILTER(ZG>ZD,2);
TJ3:=ZG=REF(ZG,BARSLAST(TJ2)) OR ZD=REF(ZD,BARSLAST(TJ2));
TJ4:=TJ1 AND TJ2 AND NOT(TJ3);
TJ5:=BETWEEN(ZD,REF(ZD,REF(BARSLAST(TJ4),1)),REF(ZG,REF(BARSLAST(TJ4),1)));
TJ6:=BETWEEN(ZG,REF(ZD,REF(BARSLAST(TJ4),1)),REF(ZG,REF(BARSLAST(TJ4),1)));
TJ7:=ZG>REF(ZG,REF(BARSLAST(TJ4),1)) AND ZD
-
通達信客服：
你至少排個版再貼出來啊 ！！！！
-
網友交流：
謝謝版主，我也不知道為什么是這樣排版的。
再試試
- 網友交流： http://tdx.com.cn/dispbbs.asp?boardid=12&Id=296098
有思路，想編寫各種指標公式，程序化交易模型，選股公式，預警公式的朋友
可聯系技術人員 QQ: 1145508240 進行 有償 編寫！（不貴！點擊查看價格！）
相關文章
-
沒有相關內容
會員登錄/注冊